The ZENCAR portable charger lets you charge an electric or plug-in hybrid vehicle from a CEE 32 A industrial socket (red 5-pin plug), found in garages, workshops, farms, or construction sites. The charger uses a single phase, so it charges at up to 7.4 kW. You can set the charging current between 10 and 32 A, and the delayed-start timer lets you shift charging to a cheaper off-peak night rate.
Key features
- Up to 7.4 kW (single-phase charging, 230 V)
- Power plug: red CEE 32 A, 5-pin (three-phase socket)
- Current settings: 10 / 16 / 20 / 24 / 32 A (approx. 2.3–7.4 kW)
- Type 2 vehicle connector (IEC 62196-2)
- Approx. 6 m total length: 75 cm power cable, control unit, and 5 m vehicle cable
- OLED display: charging time and power, voltage, current, energy consumed (kWh), control unit temperature
- RFID card included: change the charging current and set the delayed-start timer (2, 4, or 6 hours)
- Color LED status indicator (ready, connected, charging, error)
- Temperature sensor: above 70°C, the charger reduces the current; above 85°C, it stops charging and resumes once it has cooled down
- 12 safety protections, including 30 mA AC residual-current protection, overvoltage, undervoltage, overcurrent, lightning, electrostatic discharge, and grounding detection
- IP66-rated control unit enclosure, resistant to rain and dust
- Carrying bag included
How to set the delayed-start timer
After plugging the connector into the vehicle, tap the RFID card on the reader:
- Once: charging starts in 2 hours
- Twice: in 4 hours
- Three times: in 6 hours
- Four times: timer off; charging starts immediately
Technical specifications
| Parameter | Value |
|---|---|
| Model | ZENCAR Model A, 32 A version |
| Maximum power | 7.4 kW |
| Charging voltage | 230 V AC, 50/60 Hz, 1 phase |
| Charging current | 10 / 16 / 20 / 24 / 32 A (adjustable) |
| Vehicle connector | Type 2 (IEC 62196-2) |
| Power plug | CEE 32 A, 5-pin, red (3-phase socket) |
| Power cable (CEE plug to charger) | 75 cm |
| Control unit length | 25 cm |
| Vehicle cable (charger to Type 2 plug) | 5 m |
| Total length | approx. 6 m |
| Display | OLED |
| RFID card | current and delayed-start timer settings |
| Residual-current protection | 30 mA AC |
| Standard | IEC 61851 |
| Protection rating | IP66 (control unit enclosure) |
| Operating temperature | -25°C to +50°C |
| Included | charger, RFID card, carrying bag |
| Warranty | 2 years |
